Teflon film pressure drivepipe is made by molding polyflon through film pressing method under ordinary temperature, and then sinter it into different specifications of drivepipes.
         1. Usage:
        -180℃----+250℃anti-corrosion and medium sealing pieces.
        2. Appearance:
         It is homogeneous in structure, smooth in appearance, without crack, air bubble, Delamination and mechanical scratch. The arched degree of annular tube is not more than 2 millimeters but permits to a few exogenous impurity.
        3. The negative allowance of annular tube of Teflon is not less than 1 millimeters and the positive allowance of inner diameter is not more than 1 millimeters.
       

      4.index of physical mechanical properties:

Notes: tensile strength of angular tube and breaking elongation of angular tube pressing standard test piece according to the means of inspecting the resin and don’t do full scale investigation.
    5.Specification: （Outer diameter×inner diameter×length Unit: millimeter）：17×7×100～325×240×150